Bioglo Ophthalmic Strip

Each sterile strip is impregnated with 1 mg. of fluorescein sodium U.S.P.

For staining the anterior segment of the eye when fitting contact lenses, in disclosing corneal injury and in applanation tonometry.

To insure full fluorescence and patient comfort, the BioGlo impregnated tip should be moistened before application. One or two drops of sterile irrigating or saline solution should be used for this purpose. Touch conjunctiva or fornix as required with moistened tip. It is recommended that the patient blink several times after application.

1. Hold package in middle and tear down toward sterile strip

2. Turn over and tear down from other side, taking care not to tear the sterile strip.

3. Grasp each end of package firmly as shown, without touching the sterile strip, and pull apart.

For external use only. Contents may not be sterile if individual strips have been damaged or previously opened.

17238-900-99: BioGlo Individual Pouch (above)

17238-900-11: Dispenser Carton containing 100 strips (above)

17238-900-30: Dispenser Carton containing 300 strips (above)